Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dee Earley]

I've just tried forcing it to transceive all house codes and that hasn't had any effect when moving back to the original PC.
I'll try doing a more exhaustive test when I can move all the kit around and have a battery to hand

[Tuicemen]

Just curious?
You state your testing a CM15A however forum shows your connecting from the UK.
Is this indeed a CM15A(North American version) or CM15E (European version)?

[Dee Earley]

Pass, the label says "CM15 PC USB interface".
'tis one of these:
http://www.icode.co.uk/icatcher/cctvshop/cm15pro-x10-computer-interface-and-rf-transceiver-p-501.html
We get them from another UK reseller so I presume they are the European version.

[Brian H]

Are you using the European or US version of AHP?

[Dee Earley]

On the one machine with it installed, I can't tell. All the about says is "ActiveHome Pro with SmartMacros" version 3.226
How can I tell?

[Tuicemen]

Okay that's the European version of the CM15
Most here use the North American version which use different frequencies for RF and operate on 110 volt.

The SDK software should work fine for both cm15 versions as programs I and others created work fine for users of the CM15E.
There isn't a setting for transceives in the SDK.
The SDK sees all HC and transceives all unless you code something to ignore some House codes.
I've notice some actions aren't reported with the SDK samples, I assume it is just a mater of coding.

The fact that the device doesn't turn on or off from one machine but does from another indicates (to me) you have a noise issue from the problem PC.

[Dee Earley]

Ok, Is the fact that I see the "recvplc" when I send commands purely down to "echo" on the PLC side?
i.e. It's not reporting the fact that IT has sent the plc commands, but it has received back its own commands.

Things make slightly more sense now I think...

[Noam]

Ok, Is the fact that I see the "recvplc" when I send commands purely down to "echo" on the PLC side?
i.e. It's not reporting the fact that IT has sent the plc commands, but it has received back its own commands.

Things make slightly more sense now I think...

Sounds like you got it.
The SDK will report a "recvplc," even for commands it SENDS out over the powerline.
The Activity Monitor in AHP usually reports correctly if it sent a command versus receiving it.