Transceiver TM751 Question

[dparnell]

My Transceiver keep on switching on and off when I plug it into a wall socket, does anyone know why?

Thanks

[Brian H]

The TM751 is only controlled by an RF signal from am remote or motion sensor. It is hard wired to Unit 1 and the House Code on the dial.
Are any of your cameras addresses using the unit 1 code? If so everytime you turn that camera on and off. The TM751 will also cycle to follow.
If it switches as soon as you connect it to the wall outlet. It maybe defective.

[BaBaLou.]

Just in case, check any stuck or defective remotes forgoten about sitting in a box or drawer or inside the back of the couch (personal experience).

[dparnell]

Hi,

Great information, I did not know that it was hardwired to #1, I have been having a challenge getting images to the Vanguard software and was using firecracker to set the camera to on. Now I know why the Transmitter keep switching on an off....................... you guys rock.

Still don't have any picture from my cameras but at least we are moving forward.

Happy New year to you all