Topic: Vanguard Accessing Image problem update (Read 4873 times)

dparnell · « **on:** December 29, 2008, 02:10:28 AM »

Hi,

I am completely new to X10 and have purchased the 4 camera security kit and associated adapters to use on my PC (Vista). Thanks to the forum I was able to get the drivers installed for the VA11A but now when I use Vanguard the software shows me the different cameras as all "accessing image" but no image appears.

Is there something I have missed?

Thanking you in advance

Update

I reinstalled the software and the drivers installed okay, now I get a picture of 2 images of a product code on some sort of wood, this is not from my cameras but seems to be an image with a clock advancing at the bottom.

Anyone got any ideas

Thanks

Tuicemen · « **Reply #1 on:** December 29, 2008, 08:03:04 AM »

You state that you have the drivers installed but does the VA11A actualy show up in device manager?
If you have edited the Va11A for vista you'll still need to manualy install the driver as Vista won't see it as windows signed!
You most likely will need to do it as administrator!

dparnell · « **Reply #2 on:** December 29, 2008, 12:33:15 PM »

Hi

Yes it does show up correctly under imaging devices as working.

Any other ideas I where I need to look

Thanks

Derek

dparnell · « **Reply #3 on:** December 31, 2008, 08:16:16 PM »

We are up and running

News:

Author Topic: Vanguard Accessing Image problem update (Read 4873 times)

dparnell

Vanguard Accessing Image problem update

Tuicemen

Re: Vanguard Accessing Image problem

dparnell

Re: Vanguard Accessing Image problem

dparnell

Re: Vanguard Accessing Image problem update