How do I control a TM751 Mini Transceiver with Active Home v1.4?

[kepinel]

Please disregard, solution found.

How do I control a TM751 Mini Transceiver with Active Home v1.4?

I cannot seem to control the switch portion of my TM751 Mini Transceiver via CM11A and ActiveHome v1.4. 

I am thinking it is a problem with Module Selection in the Active Home software.  As there is no TM751 Module available, I have tried using the RR501 as well as both of the two pin appliance modules available.  Using the "All Lights On/Off" commands does not help.

The TM751 House Code is set on A, there is no selectable Unit Code (defaults to 1, I believe).

My EagleEye is set to trip a Lamp Module LM465 via the TM751 and that works fine.

Mini Transceiver TM751 set A
EagleEye MS14A set A1
Lamp Module LM465 set A1
Computer Interface CM11A

Thank you in advance for your help...

[steven r]

Why not share your solution? There could be at least one other person out there still using AH v1.4. 

Welcome to the forum! Feel free to post any other questions that may come up for you. It's been a while since many of us have worked with AH v1.4 but there is a wealth of resources here for information.

[dave w]

krepenil probably meant "Answer found" because I don't think a CM11 (Active Home 1.4) can control a TM751. The CM11 can not send RF.

[Brian H]

Right and the TM751 has no power line receiver in it. Thus can't be controlled by any power line signals.