Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cj4331]

I got a 4 piece FireCracker kit CK18A with the unit firecracker unit itself being CM17A I believe.  Well the software will not see the firecracker.  The pass through works fine as the uninterpretable power supply monitoring that is plugged into it works fine.  I tried this on a very old pc of mine and it works on that one.  What do I need to test to get it to work on my main pc?  Like I said the serial port works because the UPS communications takes place on it just fine even through the firecracker.  Ideas?

[Tuicemen]

cj4331 the cm17a will not work with the firecracker software if the x10net.dll is running!
How ever other thirdparty software will work for the cm17a if the x10nets is running!

[cj4331]

your're onto something.  I did purchase a wireless camera system from X10 awhile back.  It had a usb transceiver and software that was loaded on the pc that will now not work with firecracker.  I uninstalled the camera software cause I returned the camera kit but maybe that dll is still running.  Do you know how I check and remove the problem dll?

[Tuicemen]

Press ctrl alt delete (opens windows task manager) find the X10nets.exe in running processes and end it!
Then go to C:\Program Files\Common files\x10\Common  remove(delete) the x10nets.exe file.

[Dan Lawrence]

Of course, if the OP is also running AHP, deleting X10Nets.exe will deprive it of any module status.

[cj4331]

X10nets.exe wasn't running.  Apparently that's not it.

[cj4331]

I got it!  I found something on x10s support site about it not working with a mouse as a passthrough device because a mouse was a full time device.  Well, that got me thinking.  The UPS monitoring is probably a full time device too.  So I uninstalled it and sure enough the firecracker now works.

Kinda wish this wasn't a serial device but a usb device but hey--that's life.

Now I understand there is a lot of programs out there that will let me script or time events using the firecracker.  What's fuse?  Is it free?

[Tuicemen]

fuse is an addon for the firecracker software that gives you timers and such!
No it isn't free
If you enjoy writing scripts get misterhouse it suports the CM17A and is free!
After you use the CM17A for a while you'll soon see how limited you are doing home automation with it!