Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: What's the difference?? CM17A/CM15A  (Read 4527 times)

Kramer Chins

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 262
    • Kramer Chins
What's the difference?? CM17A/CM15A
« on: February 19, 2009, 10:20:53 PM »
What is the difference between the FireCracker (CM17A) and AHP USB Interface (CM15A) ?

Are they basically the same thing, just one Serial and the other USB ?
Logged
Registered Members of MCBA... WWW.KRAMERCHINS.COM

Trying to learn X10 Day by Day...........

-Bill- (of wgjohns.com)

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 81
  • Posts: 1340
  • He's just this guy. You know?
    • wgjohns.com
Re: What's the difference?? CM17A/CM15A
« Reply #1 on: February 19, 2009, 10:34:37 PM »
The CM17A only sends commands by RF so you will need a RF to Power Line transceiver to communicate with most modules.

The CM15A has a built-in all house code RF transceiver and natively sends both RF and Power Line commands.

Plus, the CM15A works with Active Home Pro software and I don't think the CM17A does.
Logged
-Bill- (of wgjohns.com)
bill@wgjohns.com

In the real world, the only constant is change.

When I'm online you can find me in the Home Automation Chat Room!

x10dude

  • Sr. Member
  • ****
  • Helpful Post Rating: 5
  • Posts: 120
Re: What's the difference?? CM17A/CM15A
« Reply #2 on: February 20, 2009, 03:14:16 AM »
I wish they would include that in their literature. I ended up getting both (as part of bundles) with the firecracker still in the box. Whos uses serial ports these days anyway? None of my computers even have one and I have 5 of them
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: What's the difference?? CM17A/CM15A
« Reply #3 on: February 20, 2009, 06:51:42 AM »
I still use serial ports  :'
Logged

martinito

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: What's the difference?? CM17A/CM15A
« Reply #4 on: February 20, 2009, 06:58:10 AM »
I think it's worth mentionning that the Firecracker is ONE WAY and only ment to send orders from your PC to your home (a computer controlled remote).

With the other one (USB) you get a two way communication allowing you to create macros that respond to commands issued by other controllers. e.g.: you can call your macro from any controller in the house.

I hope it helps,
Martin
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2299
    • XTB Home Page
Re: What's the difference?? CM17A/CM15A
« Reply #5 on: February 20, 2009, 08:48:39 AM »
Quote from: x10dude on February 20, 2009, 03:14:16 AM
Whos uses serial ports these days anyway? None of my computers even have one and I have 5 of them

ALL of my computers have serial ports.  This one even has a serial expander board to provide extra I/O for the Ocelot, Carrier HVAC zone controller, and an anemometer.  Serial certainly isn't as fast as USB, but you can run it 50 to 100 feet without a problem.  It's speed (about 300 times faster than X10) is fine for control functions.

Jeff
Logged
X-10 automation since the BSR days

x10dude

  • Sr. Member
  • ****
  • Helpful Post Rating: 5
  • Posts: 120
Re: What's the difference?? CM17A/CM15A
« Reply #6 on: February 20, 2009, 03:07:23 PM »
Wow! I guess I'm just a bit ahead of the curve then. I haven't used a serial port since I programed an SR232-based inventory scanner in the early 90s. I've only owned legacy-free PCs for the last 10 years or so. Didn't mean to insult anyone though. I do appreciate what you guys are doing with the forums!

Thanks..
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.