Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GregH]

I have two Macros firing at the same time and their performance is erratic.

Macro - Floods On (Turns on two PR511s), code B1-On
Macro - Gar Out Off (Turns off one Leviton HCM06-1TW), code B2-Off

I have both of them set to go at 10:30 p.m.  Sometimes the Gar Out Off macro does not turn off the Garage Outside lights.
Does the CM15A have a problem running two commands at the same physical time? 
I'm currently running AHP 3.228 which I had downgraded from 3.236 due to advice from this board.  However, I built the house and macros in 3.236.  Could that be a cause of some of the erratic behavior?

Thanks for the help,
Greg

P.S.  I have the CM15A plugged into one of Jeff Volp's XTB-IIRs.  I love that XTB!

[JMac]

You know, I usually stagger my macros by a minute and I,ve had few problems.  Not sure if I have to or not as I have never done any testing with "same time" macros.  You might try staggering the times and see if you get better results.

[GregH]

Thanks.  I was wondering if that might be an issue.  I'll set up some tests and report back here.