Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: in wall 208V/220V module  (Read 9422 times)

smjm1982

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
in wall 208V/220V module
« on: August 19, 2009, 12:27:52 AM »
Dont think you have this one..

Would be nice to have this module in place so its not so noticeable.  I need it to make sure my power hungry a/c in the living room downstairs turns off at least.. I would likely time it to turn on about 10:30am and turn off at about 1:30am automatically on a daily basis.  Currently it is hardly ever off and must be burning a ton of electricity.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: in wall 208V/220V module
« Reply #1 on: August 19, 2009, 06:15:10 AM »
A complete 220 volt fixture mount would be nice.

ACT use to make some 220 volt devices but I just looked and they seem to be obsolete.

Closest I have seen would be an X10Pro XPS3 which is a wall switch for 220 Volts at 20 Amps or the XPR2 220 Volt 20 Amp single outlet.

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.