while scan

[abc]

help I need macro that in AHp that my x10 floodlight stop coming on . While useing the macro scan I use house code c and unit C1-5 on 5 wired cameras and the same on motion dect. and on the x10 floodlight on in the day time while on motion

thank u abc

[Dan Lawrence]

Put the Floodlight on a different housecode, that should get rid of the problem.

[abc]

Thank you for help
Let get this right put the floodlights on another house code, What do with the motion detc. I have three of them
on house code C2,3,4
thank you

[Brian H]

You may want to readdress your motion sensors.
Most have a dusk dawn feature. The dusk dawn Address is the motion address +one Unit Code.
So your C2 Motion Sensor is going to send a C3 On at dusk and a C3 off at dawn.
The C3 is going to send a C4 on at dusk and a C4 off at dawn.

You can use the motion sensors on and off to trigger through a macro the lights on a different house code.
You may have to readdress the motion sensors unit codes if the dusk dawn signals cause unexpected things to heppen.