Please login or register.

Login with username, password and session length

Author Topic: ms14a sensor placement  (Read 2777 times)

Brandt

  • Hero Member
  • *****
  • Helpful Post Rating: 11
  • Posts: 728
  • Sorry miss, I was giving myself an oil-job.
ms14a sensor placement
« on: March 19, 2010, 06:42:13 PM »

Anyone try placing an ms14a in the kitchen? I am doing it, but worried the oven or stove-top may cause problems when in use....

Also I would like to try to place one under the dining room table to see leg movement while people are at the dinner table and to avoid hot foods


any thoughts?
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: ms14a sensor placement
« Reply #1 on: March 19, 2010, 09:56:47 PM »

any thoughts?

You must not have pets or small children.
Logged
Home Automation is an always changing technology

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: ms14a sensor placement
« Reply #2 on: March 20, 2010, 06:21:07 PM »

Anyone try placing an ms14a in the kitchen? I am doing it, but worried the oven or stove-top may cause problems when in use....

Also I would like to try to place one under the dining room table to see leg movement while people are at the dinner table and to avoid hot foods


any thoughts?
Stove/oven should not cause problems because the motion detector looks for a fairly rapid change in infrared movement, and it is more sensitive to horizontal movements than vertical. If you are positioning the MS below the table it's visual field should be below the heat emissions of the stove burners. But I wouldn't even worry about that,  as long as the motion detector is not aimed directly at the stove top (where it would see heat rising). Non moving heat sources usually will not trigger a motion detector (he says with confidence).
Logged
"This aftershave makes me look fat"

Brandt

  • Hero Member
  • *****
  • Helpful Post Rating: 11
  • Posts: 728
  • Sorry miss, I was giving myself an oil-job.
Re: ms14a sensor placement
« Reply #3 on: March 21, 2010, 12:29:13 AM »

hmmm well I guess if we're cooking in the kitchen we would need light anyway so I think it would be ok.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.