Please login or register.

Login with username, password and session length

Author Topic: DIRDC X10 Infra-Red Transmitter  (Read 4863 times)

dbemowsk

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 428
    • PHP Web Scripting
DIRDC X10 Infra-Red Transmitter
« on: July 10, 2010, 11:41:59 PM »

I am wondering if anyone has any technical information/schematics/etc... on the DIRDC Infra-Red Transmitter.  This device which uses the european X10 RF frequency will not work in the US.  I am wondering if this uses a daughter card RF receiver similar to the ones in the TM751 such that it may be possible to swap a TM751 daughter card into this unit and make it useable for US based X10 equipment.  I have several TM751s in the old parts box that are collecting dust and if I can use them to mod something  else and get use out of them, that would be nice.

Ultimately it would be nice if someone would manufacture a device like this for US X10 equipment.  The IRLinc was one that was similar for US based X10, but that is a discontinued device and is extremely hard to find.
Logged
Dan Bemowski
Owner of PHP Web Scripting LLC
Programmer of RemoteWatch X10
User of any X10 products I can get my hands on.

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: DIRDC X10 Infra-Red Transmitter
« Reply #1 on: July 11, 2010, 10:52:18 PM »

....daughter card RF receiver similar to the ones in the TM751 such that it may be possible to swap a TM751 daughter card into this unit and make it useable for US based X10 equipment.

AWESOME IDEA!!!!
Logged
Home Automation is an always changing technology

dbemowsk

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 428
    • PHP Web Scripting
Re: DIRDC X10 Infra-Red Transmitter
« Reply #2 on: July 11, 2010, 11:12:30 PM »

I saw what this thing could do and I wanted one.  The ability to have my X10 system perform 16 IR on/off (32 total) commands that can be learned from any of my remotes, how cool is that.  I could get one for my living room upstairs, and one for my bar/home theater room in the basement.  It would be TRUE universal remote control.
Logged
Dan Bemowski
Owner of PHP Web Scripting LLC
Programmer of RemoteWatch X10
User of any X10 products I can get my hands on.

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: DIRDC X10 Infra-Red Transmitter
« Reply #3 on: July 12, 2010, 03:23:08 PM »


One _major_ problem in trying to automate appliances by emulating a remote with an IR transmitter is that very few (if any) have true Power_On and Power_Off controls, only a Power_On/Off toggle.  So unless you have some sort of feedback (either visual or via external circuitry), you can never be positive about the On/Off state of the appliance.

(One possible external circuit might be a current transformer in the appliance's line cord which is connected to an X10 Powerflash module.)
Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

pconroy

  • Hero Member
  • *****
  • Helpful Post Rating: 9
  • Posts: 294
Re: DIRDC X10 Infra-Red Transmitter
« Reply #4 on: July 12, 2010, 05:28:53 PM »

I saw what this thing could do and I wanted one.  The ability to have my X10 system perform 16 IR on/off (32 total) commands that can be learned from any of my remotes, how cool is that.  I could get one for my living room upstairs, and one for my bar/home theater room in the basement.  It would be TRUE universal remote control.

I grabbed a Harmony some time ago and didn't play around with it that much - but isn't what you described perzactly what the Harmony does?
Logged

dbemowsk

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 428
    • PHP Web Scripting
Re: DIRDC X10 Infra-Red Transmitter
« Reply #5 on: July 12, 2010, 05:48:49 PM »


I grabbed a Harmony some time ago and didn't play around with it that much - but isn't what you described perzactly what the Harmony does?

What I am looking to do is have a device that is like the IR Commander that has IR transmitters that attach to the front of my equipment so that I can run my AV equipment using AHP or any other X10 controller.  This way I can do things like set up macros to ready my home theater with one button press.  I do realize that the harmony will learn another remotes commands, but I cannot send an X10 RF signal and have it turn on my TV or cable box. 
Logged
Dan Bemowski
Owner of PHP Web Scripting LLC
Programmer of RemoteWatch X10
User of any X10 products I can get my hands on.

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: DIRDC X10 Infra-Red Transmitter
« Reply #6 on: July 12, 2010, 07:52:02 PM »

I use the IR543 and a Harmony remote in my Home Theater. It allows me to have a one button [play movie] that does everything... lights included.
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.