Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[shuggins]

Hello!

Just purchased and set up my AHP with CM19A module.  It came with TM751 Transceiver Module and one Lamp Module.  It will successfully send signals to transceiver (I hear the *click* and the light I attached to it goes on/off), but if I try a lamp module... nothing.

I'm pretty versed in X10 (having tried the Firecracker set), but why won't this set work with a simple lamp module?  IE: I can have the TM751 (transceiver) on the other side of house, and it gets the signal, but if I dial in to the lamp module in the same room I am in...  nothing.  I have tried it all in same room... separated as well, nada.

Anyone ran into this?  The old Firecracker module worked great.... Not sure whats ups with this CM19A.

PS: I installed the AHP software and the SDK software...  then connected the CM19A....  opened the software, it recognized everything.  I was able to turn on/off the transceiver ONLY.  Nothing else.

Thanks so much for reading this. And I would appreciate any advice on this!  I want to love this kit.

Scott

[Dan Lawrence]

Since you got AHP you should also have the CM15A interface it needs.    The CM19A does not transmit to AHP.   

[shuggins]

I got this delivered to me: CM19A, TM751 Transceiver Module, and a link to AHP Software to download.  I already had my lamp module from previous kit.

I see...  looks like I bought a junk package.  It was $9.99 right here on X10.com.  Nice.

[Knightrider]

AHP does work with the CM19 as you've already seen.  Try plugging the lamp module into the same outlet as the tm751 and set them both to the same house code and report back.

[-Bill- (of wgjohns.com)]

Obviously, Dan Lawrence has already forgotten about the new kit that comes with the new version of AHP that supports the CM19A.   

Did you set the lamp module to the same House Code as the TM751?

Do you have any other power line controllers that you could use to send a test signal to the old lamp module?

 

[shuggins]

Bill,

YES!!  I tried it and no matter how far away, if I set the House Code on lamp module the same as the House code on transceiver...bueno.  And..I know why.  The Transceiver (if set to "b" for ex) will only control other modules with "b".

I feel stupid but thanks, guys!!!  Very helpful, all of you!

I like the AHP software so far.  Can't WAIT to dig further.

[-Bill- (of wgjohns.com)]

Bill,

YES!!  I tried it and no matter how far away, if I set the House Code on lamp module the same as the House code on transceiver...bueno.  And..I know why.  The Transceiver (if set to "b" for ex) will only control other modules with "b".

I feel stupid but thanks, guys!!!  Very helpful, all of you!

I like the AHP software so far.  Can't WAIT to dig further.

Yep!

Don't feel too bad, even us "old-timers" miss the simple stuff sometimes!   

Glad to hear it's working for you now!