Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: pr 511 stopped working  (Read 2528 times)

biff

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
pr 511 stopped working
« on: October 03, 2010, 12:41:39 PM »
After a short power failure the light came on but never would turn off again. This may be an earlier model of the pr 511 as it is over 6 years old. If power surge burned out a componet can I replace it. These units have become very pricey as of now. Thanks for any help here as I am new to this board.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: pr 511 stopped working
« Reply #1 on: October 03, 2010, 12:52:20 PM »
Have you cycled the circuit breaker feeding the PR511?
Sometimes a short power blip can lock up modules.
A power off. Wait maybe thirty seconds. Then power on again. This may allow the modules reset circuit to restart to a normal operation.
Logged

nybuck

  • Hero Member
  • *****
  • Helpful Post Rating: 17
  • Posts: 405
Re: pr 511 stopped working
« Reply #2 on: October 03, 2010, 01:50:33 PM »
Biff -
I have found that the PR511's regular price is pretty steep...  But if you know where to look:

http://www.x10.com/promotions/pr511_ed_intalert_under50.html?PAGE
http://www.x10.com/promotions/pr511_ed_alert_1m_promo.html

it can be quite reasonable   ;)
Logged
>!

biff

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: pr 511 stopped working
« Reply #3 on: October 03, 2010, 02:30:28 PM »
Nybuck thanks a million for the link. I went there and ordered a pair. biff
Logged

nybuck

  • Hero Member
  • *****
  • Helpful Post Rating: 17
  • Posts: 405
Re: pr 511 stopped working
« Reply #4 on: October 03, 2010, 03:16:34 PM »
Glad I could be helpful   ;D
Logged
>!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.