AHP Intro Wizard Trouble

[glenn2010]

Greetings Forum Members,
  I just registered my AHP for the first time this morning and seem to be stuck at the "Timed Events" screen.
It appears that my CM15A is not sending a signal to my AM466 to turn on after the 60 second timer times out.
The AM466 is set to A and 1.
   

[Brian H]

I just did a test of the Wizard and it will not work with a Appliance Module. Only a lamp module.
Seems it does not send an on and off with the timer. It sends Bright signals the Appliance Module will not respond to.
Log from my monitoring system:
R: A1 - 12:51:37 PM 11/20/2010
R: AOn - 12:51:38 PM 11/20/2010
R: A1 - 12:51:38 PM 11/20/2010
R: AOff - 12:51:39 PM 11/20/2010
R: A1 - 12:51:43 PM 11/20/2010
R: AOff - 12:51:43 PM 11/20/2010
Timer Test here:
R: A1 - 12:52:44 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:45 PM 11/20/2010
R: ABright - 12:52:46 PM 11/20/2010
R: ABright - 12:52:46 PM 11/20/2010
R: ABright - 12:52:47 PM 11/20/2010
R: ABright - 12:52:47 PM 11/20/2010
R: ABright - 12:52:48 PM 11/20/2010
R: ABright - 12:52:48 PM 11/20/2010
R: ABright - 12:52:49 PM 11/20/2010
R: ABright - 12:52:49 PM 11/20/2010
R: ABright - 12:52:50 PM 11/20/2010
R: A1 - 12:52:53 PM 11/20/2010
R: AOff - 12:52:53 PM 11/20/2010

[glenn2010]

Thanks Brian,
  Since I don't have any lamp modules I am going to skip this step.All the rest of the wizard steps passed.
I guess its time to learn how to set a timed event for an appliance module.

[Brian H]

You are welcome.
I also found in my tests that the remaining wizard items did work fine.

Here is a link to some added information on AHP.
http://kbase.x10.com/wiki/ActiveHome_Pro

[Dan Lawrence]

Brian,  I'm a bit confused.  Where do you find the "AHP Intro Wizard"?

[glenn2010]

Hello Dan,
  Look under the "Help"tab.Second from last on that list.