AHP 3.296 Will not dim

[Maine1]

Dan, I purchased 3.296 from The Home Automation Store, bundled with TM751 and cm19a.  I will try the older version, and if it works I will stick with it for now. 

[Dan Lawrence]

You really need to get the CM15A, I understand you can get one on E.Bay for less than X10USA.  You will be much better off.  X10 needs to either stop selling AHP with the CM19A as new purchasers get confused or give explicit instructions about using it. 

[Brian H]

Dan He said he could turn them on and off. Only the dim function was not working through AHP and the CM19A.

Tuicemen's link seem broken.
I would try 3.271 as that was what I got when I bought my AHP with CM19A-TM751 Kit.

ftp://ftp.x10.com/pub/applications/activehomepro/
I believe Setup_AHP_271.exe is the one.

I may downgrade to 3.271 myself and see what happens.

[Tuicemen]

Tuicemen's link seem broken.

Fixed! It seems the forum won't let you inbed a ftp link!
Funny I thought it worked before!
I guess it was sometimers setting in     I forgot how to for a min or two!

[Dan Lawrence]

Tuicemen's link seem broken.

Fixed! It seems the forum won't let you inbed a ftp link!
Funny I thought it worked before!
I guess it was sometimers setting in     I forgot how to for a min or two!

Apparently not, I just clicked on it and it worked.

[Brian H]

Yes Dan. Tuicemen fixed it after I found it broken and reported it.

[Maine1]

Thanks Brian, 3.271 works!  I may switch back to 3.296 for trouble shooting.  I did notice while installing 3.271 that the software prompts to plug in the CM so it may install the drivers.  However the wrapper on the CM19a says to install drivers FIRST.  When I did the latter, it worked.

[Brian H]

Thanks for the update. It does sound like 3.296 broke the CM19A interface operation.