The palm app. store offers a app call remotewin for $4.99. The app will allow the user to control their computer. This requires portforwarding to work.
I have AHP installed on my system and included my lamp modules in my room's setup and tested it. It worked very well i could turn my lights on and off. I used remotewin first behind my firewall to try an operate my lights and it worked. I tried it with my WiFi turned off and it worked. I spent Xmas with my girl in another county and tried the remotewin software. I was able to turn on my bedroom lights to check the room with my cameras and tried the other rooms as well and it worked without a problem.
This software is not without some faults. It is slow to refresh but it does refresh. I had to us the highest refresh rate it has to get it to work comfortably. Double taps are extremely hard to pull off. So i would leave AHP open were single taps were only needed. I only minimized and maximize on my screen. Also it is not good for viewing the cameras so i used iwatchmobile in conjunction with it. I would have the iwatchmobile card open and remotewin's card open and would switch from one to the other.
I would love it if X10 could include this controll with iwatchmobile. That would be great. I didn't really check if this software was compatible with other phones, but here is their web link
http://www.deepthoughtsoftware.com/RemoteWin. It is best to get it from the app store first. hope this will help others or give you some ideas.
Author
Topic: How to use your Palm Pre' to run AHP. (Read 2758 times)