Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Kishore]

SC1200 Housecode set to 'C'
           Lightcode '6'

Scrrew-In Lamp Module RLM20 installed

RLM20 responds to 'Lights On' 'Lights Off' from Keyfor Remote KR32A

RLM20 flashes once when armed from Keyfob

RML20 stays on when armed away on console for the duration of the delay time

Is shore RLM20 responds to the console.

Trying to Set Timer: (Function 9) it asks for Unit Number

What is the unit number for this RLM20? (Tried 6 it did not work)

 

[Brian H]

On the SC1200A  key pad. Try pushing the #7 button then On. If the RLM20 goes On the unit code is 7.
The lights buttons on the KR32A do the second light code. So if the SC1200A is set to Light Code 6. The second Light Code is 7.

[Kishore]

Thanks Brian the RLM20 responds to #7. I have set up timer and that also works.


Trying to install second RLM20 but no luck. All settings same.

Maybe I have a dud RLM20

[Brian H]

No the default address  is A1. You will have to program the RLM20 to C7 or C6.
If you use C6. The keyfob lights buttons will not control it.
All the arm and alarm actions will still work. As the SC1200 has two address codes.
I am not sure how you got the first one on C7 but I am thinking you powered it up and where sending a C7 at the time.

http://kbase.x10.com/wiki/Programming_Your_Socket_Rocket_With_A_Plugin_Controller

The X10 LM15A is the same as the RLM20.

So use the SC1200 keypad buttons to send the programming signals.
As it is a controller as described in the wiki information.

If you want to have the second RLM20 also on C7.
Use the button 7 and then the On button. After you apply power the RLM20 with in the first thirty seconds. While it is in the programming mode.

[Kishore]

Thanks again Brian.....

Worked like a charm.

[Brian H]

You are welcome.