Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stuckpipe]

I have installed the lastest AHP version 3.316 and thought my new X10 Pro cameras would be list for populating my locations. Has anyone found them on the graphics?

Also, I have the VR36A receiver connect currently, do I connect the VR47A receiver to a second USB port and will the AHP automatically connect my older and newer cameras?

Your help would be appreciated...

[Brian H]

AHP 3.315 added dual video capabilities for using both the older 2.4Ghz cameras and the new 921Mhz Pro line cameras.
So a second VA12A should be supported for the other receiver.
http://www.x10.com/support/rev_ahp.htm

We have not been given any other information on device options in the GUI screen of AHP.

[Knightrider]

AHP 3.315 added dual video capabilities for using both the older 2.4Ghz cameras and the new 921Mhz Pro line cameras.
So a second VA12A should be supported for the other receiver.

The receivers are different (frequencies), but the camera switching mode remains the same, so I would think a simple "Y" cable on a single video capture device and a couple of appliance modules on the receivers and some simple macro writing would be more economical than another VA12A.

Sorry to confuse yet another thread.