Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Brian H]

Smarthome X10AM466 Appliance Module. Revision 4.6 Date Code 1051
Module is two way.

Local Control Sensing can be set to On or Off.
Sensing current is the on the outlet. Just ignored if set Off.
36 LED 3.6 watt light glows.
Ecosmart 9 watt dimmable LED is OK.

Load:
Ecosmart OK.

In AHP. Choosing an AM466 worked fine.
If Off and local control turns it On. It will send an On to its address for AHP to process.

It responds to an All Units Off. All Lights On and All Lights Off are ignored.

[Brian H]

The X10AM466 looks like a Icon On/Off adapter with maybe the firmware changed.
They actually forgot to peel the six digit Insteon ID number tag off of it. 

[dave w]

Wohoo! Are the new X10 clones as quiet as the "Insteon" version?

[Brian H]

Yes they use a 24 volt DC coil power relay {I had to look inside  } and not the ratchet used by X10.
Even the older discontinued 2000 series modules used the same 120 volt AC coil power relay. They used in the earlier revision Insteon/Icon modules and are also quiet.
One reason I had used the Smarthome 2000 series modules. NO CLUNK!

Well the curious side of me had to try it. I used the six digit ID number and tried to add it to my Insteon system. It added no problem and was found as a 2856S3B Icon Relay 3 pin.

This maybe an early unit only thing. They may have just relabeled some modules until the new X10AM466s are in production. With X10 only firmware.
I would not have even had a clue. If they didn't forget to remove the six digit ID label from the unit.

[Noam]

Well the curious side of me had to try it. I used the six digit ID number and tried to add it to my Insteon system. It added no problem and was found as a 2856S3B Icon Relay 3 pin.

Better order a bunch more, before they change the production!

[Brian H]

Update. Today I looked at the Smarthome Site and the new price is $29.99