Topic: Alhena. control over the image of your IP camera. (Read 8748 times)

josevaello · « **on:** August 07, 2010, 02:48:08 AM »

With the new software (ALHENA), you can click directly on the actual image captured by a camera Ip, without icons. You can click on a light, a curtain, an awning, etc. in real time and observe the response of the element.
You can download it for free in alhenaing.com

ximet64 · « **Reply #1 on:** April 12, 2011, 01:42:59 PM »

Could you explain how you are going to control the lights by detecting presence?. Is it possible to control multiple lights with the same camera. ?

Thak you.

josevaello · « **Reply #2 on:** April 13, 2011, 03:24:04 AM »

You can mark as many areas of a picture as you like, on these areas can send two types of orders.

OFF orders, if after a while the camera does not detect the presence in that area.

ON Orders, If presence is detected and not detected in a contiguous area, to prevent false activations due to changes in ambient light.

Very simple, and of course a camera can control several lights or appliances.

josevaello · « **Reply #3 on:** January 28, 2012, 12:41:59 PM »

With this software you can integrate the axis ip cameras in your x10 system, and control x10 modules by motion detection.

Free download at:

www.automation-x10.us

Dan Lawrence · « **Reply #4 on:** January 28, 2012, 01:42:00 PM »

Ok, where is Axis located? United States, Canada or Europe. The website doesn't say.

News:

Author Topic: Alhena. control over the image of your IP camera. (Read 8748 times)

josevaello

Alhena. control over the image of your IP camera.

ximet64

Re: Alhena. control over the image of your IP camera.

josevaello

Re: Alhena. control over the image of your IP camera.

josevaello

x10 AXIS CAMERA

Dan Lawrence

Re: x10 AXIS CAMERA