Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Controlling Insteon  (Read 4241 times)

sundance

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Controlling Insteon
« on: May 24, 2012, 09:12:28 PM »
If I add Insteon controllers to my X10 system will I be able to control them with the X10 software?
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Controlling Insteon
« Reply #1 on: May 24, 2012, 09:31:02 PM »
no
Logged
Remote control is cool,

but automation rules!

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: Controlling Insteon
« Reply #2 on: May 24, 2012, 11:13:28 PM »
Some of the Insteon interfaces and some of their software will allow control of both Insteon and X10. Some Insteon switches/modules could be configured with X10 addresses and controlled with X10 software and interfaces. They seem to be discontinuing those, however.

I expect to introduce something (hardware & software) in about 3 months that will allow control of X10, Insteon, UPB, ZWave, etc. from Windows, Linux, OSX and Android.
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Controlling Insteon
« Reply #3 on: May 25, 2012, 05:56:28 AM »
My old Insteon modules can have an X10 Primary Address programmed into them. Some even support a Secondary X10 Scene Address programmed into them.

As pointed out. The X10 support is being phased out. Best to look at the sales pages to see if X10 is listed as NA.
Logged

sundance

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Controlling Insteon
« Reply #4 on: May 25, 2012, 02:33:47 PM »
Quote from: dhouston on May 24, 2012, 11:13:28 PM


I expect to introduce something (hardware & software) in about 3 months that will allow control of X10, Insteon, UPB, ZWave, etc. from Windows, Linux, OSX and Android.

Do you have a email list or web site to keep me updates on this project?
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: Controlling Insteon
« Reply #5 on: May 25, 2012, 03:17:40 PM »
Quote from: sundance on May 25, 2012, 02:33:47 PM
Quote from: dhouston on May 24, 2012, 11:13:28 PM
I expect to introduce something (hardware & software) in about 3 months that will allow control of X10, Insteon, UPB, ZWave, etc. from Windows, Linux, OSX and Android.
Do you have a email list or web site to keep me updates on this project?

Watch this page http://davehouston.org/Zarduino.htm. I'll set up a forum once it nears release.

The first releases will be the MegaUtility and MegaWiFi+ shields along with a ZarduinoTM Mega2560 which I'm working on at present.

Note that you will still need powerline interfaces for any of the technologies you want to use.
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.