Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: DS10A issues  (Read 3239 times)

emada

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
DS10A issues
« on: May 31, 2012, 02:40:49 PM »
I have a few DS10A door/window sensors that out of the blue stop reporting in. I would push the test button and it would work for a day and stop reporting in again. Is there a standby or sleep mode or something I dont know about?   ???
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13296
Re: DS10A issues
« Reply #1 on: May 31, 2012, 03:57:25 PM »
There is no sleep or standby mode in a DS10A. They should report in around every hour. If the console doesn't receive a report in four hours it then flags a sensor error.

Which console are you using with the DS10As?

Have you verified the batteries are good?

Logged

emada

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: DS10A issues
« Reply #2 on: May 31, 2012, 04:19:50 PM »
I'm using a non-standard console, and yes there are fresh batteries in it. So there is no known reason a ds10a would stop reporting in other then bad batteries?

Quote from: Brian H on May 31, 2012, 03:57:25 PM
There is no sleep or standby mode in a DS10A. They should report in around every hour. If the console doesn't receive a report in four hours it then flags a sensor error.

Which console are you using with the DS10As?

Have you verified the batteries are good?


Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.