PLW02 3 Way Switch

Started by Eddie_T, November 19, 2012, 11:16:05 AM

Previous topic - Next topic

Eddie_T

Can the PLW02 3 way wall switch be used without a companion slave switch as a single point switch?

Brian H

You should be able to use a PLW02 without the slave.
Connect the Black wire of the Master switch to the 120 volt Line
Connect the Blue wire from the Master switch to the Load.
Tape or cap off the Red wire from the Master switch and it is not used.

Eddie_T

Thanks much! I had a chance to buy the switch at a much lower price than a WS467 which needs replacing.

SMF spam blocked by CleanTalk