Cannot connect Xx34A open wireless

[wileya]

I bought an 8 pack of the XX34A wireless cameras and have been trying to connect them to my wireless network for a week now. My wireless network uses MAC address authentication and no encryption. i can connect to the camera fine when it is wired in, put in a static IP, select the wireless network to connect to (after putting the camera's MAC address in), and when the camera reboots - nothing. I have tried changing the port from 80 to 81, connecting to a 5Ghz radio and 2.4 Ghz radio, but nothing seems to work. HELP!

[X10 Repair Depot]

I would disable the MAC address authentication to test to see if that is your problem. I have had problems when using a MAC address filter in the past (but not with an IP camera). I had to disable the filter and set up encryption to resolve my problem.

Let me know if you require any further assistance.

[wileya]

The MAC address authentication works perfeclty well on the XX36A Outdoor cameras i have running on it. They set up very easily following the directions. I don't want to dismantle a system that is currently supporting many other devices, including iPads, iPhones, Tablets, and other cameras due to what could probably be fixed by rolling back to a previous firmware version if i could find one.