Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jonis58]

Hello, i am aware that there is no direct alternative to this unit. but for what i was using it for there may be something else that will work.

setup: wiring a push button to this unit so that when the button is pushed it sends a signal to UM506 / PUM01 to relay our 24VAC which starts our machine. we use the push button because the machine we are running on the other end is on a timer, so we don't want to have to reset a toggle switch everytime we want to use it.

so basically is there any other unit out there that can have a push button wired in so that i can send the signal everytime its pressed.

any help would be much appreciated, thanks

[Brian H]

Yes as long as it is a dry closure. Like from a push button as it will not accept a low voltage like a Powerflash unit can.
The Insteon 2450 I/OLinc can have an X10 address added to its Sensor Input and one to its Relay Output.
I have used one as a test. Triggering an X10 Chime Module.
http://www.smarthome.com/2450/IOLinc-INSTEON-Low-Voltage-Contact-Closure-Interface-1-In-1-Out-/p.aspx
Users and Quick Start manuals are linked on the sales page if you care to look at them.

Side Note: One of the independent X10 Automation Dealers. Posted they have an active Factory Order for PSC01s and expect a delivery in early 2013. Though what early 2013 equates to unknown. 

[jonis58]

Thanks Brian that is exactly what i'm looking for. just bought the last PSC01 in the world on Ebay used for twice what its worth. glad to hear they are they are bringing them back tho! these will work perfect in the meantime!!!

[dave w]

I just bought an I/O Link because my my four or five Power Flashes all seem to be doing a strange slow failure (over a three year period). Can't wait to try it.

[Brian H]

dave w . One other difference in the I/OLinc is it can send an X10 On or Off. Depending on how you add the X10 address, when the Sensor Input is closed.
Full Users manual gives all the details.

[dave w]

dave w . One other difference in the I/OLinc is it can send an X10 On or Off. Depending on how you add the X10 address, when the Sensor Input is closed.
Full Users manual gives all the details.

Yes I saw that and intend on using it to ensure the I/O link relay can only lower the garage but not raise it.

Thanks!

[JeffVolp]

just bought the last PSC01 in the world on Ebay used for twice what its worth.

I still have a few of the Leviton version left that are new in boxes.  Please contact me directly if you need one.

Jeff

[john pyramid]

just bought the last PSC01 in the world on Ebay used for twice what its worth.

I still have a few of the Leviton version left that are new in boxes.  Please contact me directly if you need one.

Jeff

please contact here I need at lease one of the unit PSC01 can you help me ??

[JeffVolp]

please contact here I need at lease one of the unit PSC01 can you help me ??

I do have a few of the Leviton version left.  Please contact me directly for further information.

jeff@jvde.us