Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Normy945]

My airpad is 18 months old, it went to sleep and now when i wake it the touchscreen is non responsive. Please help. What should I try?

[Tuicemen]

Try a reset with the resetbutton.

[vconzola]

I had the same problem with my Airpad XL after about 10 months.  I put it to sleep and when it came back up the touchscreen did not respond. I can control the device with a USB mouse but that sort of defeats the purpose of having a tablet.  I've tried resetting it multiple times and re-flashing the ROM according to the instructions in this forum. The re-flash worked but the touchscreen still doesn't work. Any ideas what happened or suggestions for fixing?  Would upgrading the OS to Gingerbread or ICS help?

[diller3]

I’ve had my 7" airpad CM002 AIR 910 since November2011. Today the touchscreen quit operating after I touched the edge. Now the screen wont unlock by touch. I tried a usb mouse and it will respond as vconzola posted. Does anyone know, may I have fried the sensor screen with a small static discharge? It seems so. Is there any way to test, check a fuse? 
I am still running the orginal rom it came with.   Thanks

[X10 Repair Depot]

Diller3,

There is no fuse for the touchscreen. Your only hope would be to do a factory reset. If it still does not work,then the touchscreen is bad.

[diller3]

X-10 repair. Thanks for responding. I did finally do a factory reset by using the mouse to move the screen slider to power down. After a long boot up, the touchscreen was working. 
Aparrently only using the reset button it wasn't powering off. If you could only remove the battery simply would of worked,like a phone.
Question....
I recently bought a mini HDMI to HDMI cable but the mini end is wrong. Is there a proper name for the size that fits the airpad 910?
Thanks again for all the help.

[X10 Repair Depot]

The HDMI connector on tablet is a standard mini HDMI connector. A HDMI to mini HDMI cable is what you need. Here is an example of one that will work:


http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10242&cs_id=1024201&p_id=3645&seq=1&format=1#largeimage