Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: AHP Remote Access (IP Address Change)  (Read 4104 times)

Mustang65

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
AHP Remote Access (IP Address Change)
« on: June 27, 2013, 08:17:27 PM »
Hi All!
I have AHP running on an old 386 at my house and my IP providor changed IP address on me, when the cable modem locked up.  I was able to reboot the cable modem remotely and get everything else back up and running, EXCEPT for my remote access to AHP on the home PC. I have a batch program that notifies me when the IP address changes, so I just need to update AHP or X10 Site with it. Where can I change my IP address to the new one that was assigned to my cable modem (remotely of course).  I can not locate it anywhere. I tried a few searches, but came up with nothing.   I am thinking that it needs to be done on the X10 site and not the home PC.  Any assistance will be GREATLY appreciated.
Don
Logged

Mustang65

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: AHP Remote Access (IP Address Change)
« Reply #1 on: June 27, 2013, 10:55:24 PM »
I just thought of something.. will rebooting the AHP main PC and restarting AHP/remote resolve the new IP assignment issue?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10543
  • I don't work for X10, I use it successfuly!
Re: AHP Remote Access (IP Address Change)
« Reply #2 on: June 28, 2013, 08:03:55 AM »
A reboot should solve the issue.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Mustang65

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: AHP Remote Access (IP Address Change)
« Reply #3 on: June 28, 2013, 04:54:50 PM »
THANK YOU,
Now I just need a power failure :-)
This PC is one of the only things that is not X10 controlled.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: AHP Remote Access (IP Address Change)
« Reply #4 on: June 29, 2013, 06:05:45 PM »
Quote from: Mustang65 on June 27, 2013, 08:17:27 PM
Hi All!
I have AHP running on an old 386
WOW!
What are you running, Windows 95? You can actually get a 386 to run AHP?
Logged
"This aftershave makes me look fat"

Mustang65

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: AHP Remote Access (IP Address Change)
« Reply #5 on: July 01, 2013, 10:51:56 PM »
Running XP on a Compaq 386 with 512mb of ram.  AHP runs fine!  24/7 .. automatically restarts everything after power failures... just forgot  to put it on a X10 module.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: AHP Remote Access (IP Address Change)
« Reply #6 on: July 02, 2013, 08:25:52 AM »
Quote from: Mustang65 on July 01, 2013, 10:51:56 PM
Running XP on a Compaq 386 with 512mb of ram.  AHP runs fine! 
:)%
Logged
"This aftershave makes me look fat"

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10543
  • I don't work for X10, I use it successfuly!
Re: AHP Remote Access (IP Address Change)
« Reply #7 on: July 02, 2013, 01:22:40 PM »
I believe AHP was originally designed to run on 98 so a stripped down XP install runs it fine.
I run AHP as well as PCC with XP embedded on a Thin Client.
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.