Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sparkydog9338041@aol.com]

doorbell cam, motion activated, picture taken, rings the bell, another snapshot... And for the camaras, motion activated, and follows the motion... your not that far from it

[dave w]

 

[luke03]

doorbell cam, motion activated, picture taken, rings the bell, another snapshot... And for the camaras, motion activated, and follows the motion... your not that far from it

I would pay $100 if the camera can take a clear picture. I am trying to get a new camera to install in front of our house, with pan, tilt, two way audio and wifi, the cost is about $100.  But installation is challenge, since I have to run power lines. If the doorbell cam does not require separate power, I don't mind losing the pan and tilt requirement.

[mikeeps2]

my doorbell system is with red button and camera ip , see the video

http://www.youtube.com/watch?v=Whg4iE7mVxI

[HA Dave]

my doorbell system is with red button and camera ip , see the video
http://www.youtube.com/watch?v=Whg4iE7mVxI

I like that! I've experimented and tried various methods for a few years now. Any good image [and yours is excellent] that is also automatic... is always the best. 

[mikeeps2]

hi , thanks HA dave

i use the red button , then send the RF signal to X10 PRO PAT01 , and then to my pc , my software i add a little script what when touch the red button , call the camera ip and the door bell sound ,and i have connect my pc to my led samsung tv  what i have in my living room , and now add another little script what when touch the red button , change the tv input HDMI  to PC , and i can see  the camera door in my samsung tv too  then 10 sec , come back  to HDMI and continue washing tv

then let me do it another video for you see the samsung tv with camera ip

let me show my all system , see this another video , no is perfect , but i have one years working with that

http://www.youtube.com/watch?v=k6X2mz0GYAE

[HA Dave]

http://www.youtube.com/watch?v=k6X2mz0GYAE

VERY nice. Is that a android tablet? How is it connected (wifi, USB).... and what is it connected to (Cm15A, Home Automation PC, CM19A?).

[mikeeps2]

no , no , that is regular pc , with windows xp , i make the skin similar to tablet android , and i use CM15A , i dont use any x10 software , two good friends make for me the thermostat and x10 plugin for i can use with my software and my skin.... all those app are for windows xp but dont work alone with win xp , need the  software principal  what i use , i need fix little bugs but no is too much , as I do not much or no programming, have to wait for my friends to have time

now i like it add to my project the x10 alarm , but i dont know how work x10 alarm , my idea is add to my software via plugin the x10 alarm , but dont know if the alarm device have comunication with the CM15A

[HA Dave]

Very nice, I am impressed.

now i like it add to my project the x10 alarm , but i dont know how work x10 alarm , my idea is add to my software via plugin the x10 alarm , but dont know if the alarm device have comunication with the CM15A

I have the older X10 alarm.... and when using the "on alert" AHP plug-in I could turn the alarm on. But for security reason the software didn't make provisions for turning the alarm off.

I used a modified a security remote (SH624) so I could send an arm signal remotely. My modification was extremely simple. I used a powerflash module (PSC01) to close the arm buttons contacts.

I was in the re-making of my setup when X10 pulled the plug. I found myself with only AHP and smart macros on my replacement laptop computer. I was so bummed... I just let the system ride as it was. I only recently returned to create something new/better. Then fortunately... X10 returned as I was researching and posting on the other HA forums.