QR codes?

Started by dhouston, January 19, 2018, 08:05:06 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dhouston

January 19, 2018, 08:05:06 AM
Since I have no smartphone I lack familiarity/expertise with QR codes which may be obvious when I ask, "Why are there Android and iOS QR codes in the User Manual?
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

Tuicemen

#1
January 19, 2018, 08:13:53 AM
The QR codes if scanned by your phone will take you to the corresponding app for your specific phone.
Please Read Topic:
General Forum Etiquette
Before you post!

Tuicemen

#2
January 19, 2018, 08:18:07 AM
they just save time looking for the app.
Please Read Topic:
General Forum Etiquette
Before you post!

Walt2

#3
January 22, 2018, 02:53:59 PM
Quote from: Tuicemen on January 19, 2018, 08:13:53 AM
The QR codes if scanned by your phone will take you to the corresponding app for your specific phone.

Does that include the QR code (or what ever it is) on the back of the WM100 unit?   I thought it was some kind of unique "serial number" to the WM100 unit, and is used to register the unit.

Or am I thinking too much of the way GE Connect does it.   ;)
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Noam

#4
January 22, 2018, 03:05:39 PM
Quote from: Walt2 on January 22, 2018, 02:53:59 PM
Quote from: Tuicemen on January 19, 2018, 08:13:53 AM
The QR codes if scanned by your phone will take you to the corresponding app for your specific phone.

Does that include the QR code (or what ever it is) on the back of the WM100 unit?   I thought it was some kind of unique "serial number" to the WM100 unit, and is used to register the unit.

Or am I thinking too much of the way GE Connect does it.   ;)
No. The QR code on the back on the unit contains its unique serial number, and is required to register the unit in the app.

Walt2

#5
January 22, 2018, 03:09:53 PM
Quote from: Noam on January 22, 2018, 03:05:39 PM
No. The QR code on the back on the unit contains its unique serial number, and is required to register the unit in the app.

I think this then goes back to the original question, if you don't have a camera (or it doesn't work anymore), is there an alternate way to manually enter the unique serial number?
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Tuicemen

#6
January 22, 2018, 03:13:07 PM
Currently no!
Please Read Topic:
General Forum Etiquette
Before you post!

Walt2

#7
January 22, 2018, 03:18:37 PM
Quote from: Tuicemen on January 22, 2018, 03:13:07 PM
Currently no!

:(     Any chance to get it on the future upgrades list?

The camera on my inexpensive (ie, cheap) android tablets, has problems focusing on something that small and close-to-the-lens.    I had this problem with my GE Connect devices, because they register basically the same way.    Yes, I use these tablets because it isn't all that big of a loss if one gets dropped or sat upon. 
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Tuicemen

#8
January 22, 2018, 03:24:00 PM
The wish list section has this request you should vote yes for any options you wish implemented Authinx has stated to me suggestions with the most input will be implented first if possible.
And yes they have been reading these.
As well the devekoper has been set links to this section so all info for each suggestion can be considered.
Please Read Topic:
General Forum Etiquette
Before you post!
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk