Topic: Dim Level Does Not Resume to 100% (Read 3393 times)

Knightrider · « **on:** April 29, 2018, 01:29:17 AM »

~~Possible~~ bug. ~~Not sure~~. I will report it as a bug and move this post provided someone can duplicate my results.

Using the WM100, when I dim a module and then turn it off, and then turn it back on, the module reverts to 100%, but the app shows a return to previous level.

The WS modules I'm using are all pre-soft start.

If someone can duplicate this on their system, I'd appreciate it.

SkipWX10 · « **Reply #1 on:** April 29, 2018, 01:33:04 AM »

Just did a quick test...turned off a module that was dimmed to 60%, turned it back on and it came back at 100% but also listed 100%. Did that twice with same result.

Knightrider · « **Reply #2 on:** April 29, 2018, 01:47:01 AM »

This is frustrating.

Firmware V0.0.23
Android V2.0.07

Knightrider · « **Reply #3 on:** April 29, 2018, 01:50:23 AM »

Confirmed using Galaxy Tab E

Knightrider · « **Reply #4 on:** May 02, 2018, 11:43:39 AM »

Has ANYONE else not seen this same behavior? This is driving me nuts, but it's definitely a thing on my system.

Tuicemen · « **Reply #5 on:** May 02, 2018, 11:57:58 AM »

I actualy noticed this during testing however I suspected it was the developers attempt at preset dim which never got completed. Since I rarely use Dim/brighten I assumed it had been fixed.

Knightrider · « **Reply #6 on:** May 02, 2018, 12:47:45 PM »

Thank you. I'm moving this to the bug file.

News:

Author Topic: Dim Level Does Not Resume to 100% (Read 3393 times)

Knightrider

Dim Level Does Not Resume to 100%

SkipWX10

Re: Need Verification

Knightrider

Re: Need Verification

Knightrider

Re: Need Verification

Knightrider

Re: Need Verification

Tuicemen

Re: Need Verification

Knightrider

Re: Need Verification