Topic: Updating the CM15A Hardware Configuration (Read 2721 times)

bf9ys02 · « **on:** January 11, 2020, 10:32:27 PM »

Should I see a progress indicator when I click Update Interface?

Tuicemen · « **Reply #1 on:** January 12, 2020, 07:30:23 AM »

Nothing appears on the CM15. AHP from my recollection should display a small bar which slowly turns green.
If I remember right, it is in the bottom right off the AHP screen.
I've not used my CM15 with AHP in a few years now.

SkipWX10 · « **Reply #2 on:** January 12, 2020, 05:59:41 PM »

Depending on how complex your setup is, you may not see a progress bar, as it takes a very short time to update. I remember that 'clear interface memory' took longer and showed on the status bar...which IIRC is on the bottom left ;-)

Also, I think there are settings in preferences (under Tools) that allow you to get confirmation dialog popups when doing things like deleting, clearing and updating

bf9ys02 · « **Reply #3 on:** January 25, 2020, 02:08:48 PM »

There are options for showing download complete and clear interface complete but not for interface updated. So there was probably never a display. Thanks.

News:

Author Topic: Updating the CM15A Hardware Configuration (Read 2721 times)

bf9ys02

Updating the CM15A Hardware Configuration

Tuicemen

Re: Updating the CM15A Hardware Configuration

SkipWX10

Re: Updating the CM15A Hardware Configuration

bf9ys02

Re: Updating the CM15A Hardware Configuration