Please login or register.

Login with username, password and session length

Author Topic: Home Assistant 2023.7.2 X10 CM15A  (Read 3644 times)

schmuttis

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 56
Home Assistant 2023.7.2 X10 CM15A
« on: July 19, 2023, 07:33:35 PM »

I am a newbie to Home Assistant with some past linux experience.

Does anyone have an X10 CM15A working on Raspberry Pi 4B running Home Assistant 20237.2?

I have a lot of X10 devices throughout my home that I would like to integrate into Home Assistant.

From everything I've read I need to have mochad running. I have followed the instructions from https://www.domoticz.com/wiki/X10_devices,_CM15_Pro. I performed all of the steps in a terminal window from Studio Code Server. The only variation is that I used a mochad-0.1.21.tgz tar file that I obtained from this link: https://sourceforge.net/p/mochad/discussion/1320002/thread/9e758b6afc/ .

When I get to the test line: echo "pl a1 on" | nc localhost 1099 - I find that HAOS does not support the nc command.

I also do not know how to see if the HAOS is recognizing my CM15A or to see if the mochad process is even running?

I do not get any error in my terminal window when starting ./mochad
Logged

petera

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 27
  • Posts: 1751
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.