Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roger k.]

My system runs on XP Pro and AHP 3.186, and
a Diagonostic replacement CM15A. Recently,
I've been plagued with various
unexplainable problems. More than one light
turning ON at a time, Macros not doing too
well and I was just generally DISGUSTED, as
some of you are.
I decided to purchase an AMPLIFIER/REPEATER
(discussed in other POSTS). It plugged into
my dryer 220VAC outlet. I expected it to
work GREAT GUNS, but it did not.
Here is why:
I had 2 #TM751 RF units installed, as well
as my CM15A. The Tm751s were to receive Rf
at the other end of my home than the CM15A,
for the 2 House Codes I was monitoring.
Previously, I had noticed the TM751s had to
be critically placed. I guessed that it was
Phase related or maybe a time delay between
the TM751 and the CM15A screwing up the
TRUE transmitted code. Today, after
installing my new AMP/REPEATER I unplugged
both of my TM751s, because of past
questionable operation of my system.

WAHLA !!!!!  My system works EXACTLY as I
programmed it. I have around 35 pieces of
hardware and Macros. I have excellent range
with my Palm Pad and sensors. My home is
about 70 foot long. It finally NEAT to have
some level of confidence after 7 months of
work and grief. I hope this helps
even "one" person out there.
Roger K.

[Brian H]

The TM751s are not polite and will step on
any X10 line signals with the ones it wants
to send. The big brother RR501 will wait for
a clear power line before transmitting any
X10 signals. The cm15a also is polite and
should retransmit a clobbered transmission
from a TM751. Duplicates may happen if both
the cm15a and an RR501 both see the RF
remote commands

[DWD]

Brian, Do you know if the DS7000 Security
System is polite with its transeiver?

[Johnh]

i had same situation, had two other
transcievers to help with poor RF range,
once in a while weird things happened, got
a different antenna with more range,
removed transcievers, now all is well, no
problems in weeks, got tired of known
problems with AHP software, installed a
different box, gave my CM15A to a friend
with tiny house and 5 lamp modules, it is
been working fine for him, keep your
fingers crossed, heh, heh.