Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[edwin]

Dear friends

I have a LG plasma TV 42". And i want to
control it, with a appliance module and x10
active home system to turn on and off
remotely.
However when i turn off the tv goes to
standby mode and when i try to turn on
again remotely i can't.
I've read the manual of plasma tv and there
is not way to desactive this feature.
Somebody has any suggestion or know a way
to resolve this issue?

thank you in advance

[X10 Pro]

Unless you can make the TV turn all the way
on when it receives power, I don't think
you'll be able to do this with an appliance
module.

You might be able to use a VCR Commander
(UX21A) to control the TV, though. You could
program the TV's Power command into the
Record and Stop buttons of the VCR Commander,
and use an RF command in AHP to control it.

The main problem I see with the VCR Commander
solution is that you'll just be toggling
power -- you won't be able to tell if it's on
or off.