Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: USB Device Not Working  (Read 3729 times)

russ

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
USB Device Not Working
« on: July 06, 2005, 09:37:51 AM »
That is the error message I got when I
unplugged my USB Computer Interface and re-
connected it.  I reloaded the driver and no
longer get the message but now the message
is that the X10 USB Interface is not
connected or plugged in.  It is both.  Any
ideas what is wrong?  I had to remove some
track lights to turn them off!
Logged

billy

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 42
Re: USB Device Not Working
« Reply #1 on: July 06, 2005, 10:32:11 AM »
Try unpluging CM15 from usb, unplug from
wall, take out the bats, Wait a few minutes,
put bats back in, plug into wall, connect
usb.
Hope that works!
Logged

russ

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: USB Device Not Working
« Reply #2 on: July 06, 2005, 03:31:29 PM »
Thanks, removing the batteries is the only
thing I didn't try!  Was working like a
champ up until the time I unplugged it.
Logged

al capps

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: USB Device Not Working
« Reply #3 on: July 07, 2005, 08:07:18 AM »
My device is not working either. Its never
worked. I have tried to locate the proper
drivers for it. CM15A do you have the inf
file?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.