Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bronco]

Dusk time comes out somewhere between
11:51am to 11:56am.
Dawn times are ok.
The configuration shows the correct Dusk
times.
I've tried Nighttime, etc its works the same
for Dusk-Wrong-Wrong-Wrong
I'm running v3.180

[roger1818]

Bronco:  I am not sure if I understand
exactly what your problem is.  Some things
to check though are that the time zone is
set properly in Windows and that your
location is set properly in the AHPro
software.

[bronco]

I made a mistake, it was the DAWN time that
is off.
My cpu time and AHP time is correct and the
time zone is correct.  I'd include a screen
shot if this system allowed it.
Configuration gives:
3/06-3/14  Dusk=5:51pm  Dawn=5:58am
Timer is set to ON at Dusk,  Off at Dawn
AHP calculates:
On at 6:13pm     Off at 12:15pm

Neither is really correct comparing it to
the Configuration times.

[X10 Pro]

Bronco: So the times that show up when you
create a timer are different (way off) from
the dusk/dawn times listed in Hardware
Configuration? Try opening Hardware
Configuration and setting your city, then
choose "Update." Immediately after that
download timers and macros, then open the
timer and see what it says.

[bronco]

already been there, done that.  Cleared
memory also.  This is all with leaving the
cm15 plugged into USB and 120v.
I have set two timers one for dawn and one
for dusk. Will monitor those and report back.
If I right click on a timer it gives me the
option to generate test timers based on the
timer I clicked, all of these times are off,
so I think I need to monitor it in real time