Please login or register.

Login with username, password and session length

Author Topic: Snapstream Firefly and X10 Active Home Pro  (Read 4432 times)

john

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Snapstream Firefly and X10 Active Home Pro
« on: March 10, 2005, 12:14:01 PM »

Since the Firefly is really an X10 product, I
thought I'd ask this question here.

I can't seem to get the Firefly and AHP
software running on the same machine.  If I
install Firefly then AHP, AHP will knock out
Firefly, and if I install AHP then Firefly,
Firefly will knock out AHP.

Any ideas on how to get them to peacefully
co-exist?

This wouldn't be an issue if the CM15A ran
it's macros properly without being connected
to a PC!!
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Snapstream Firefly and X10 Active Home Pro
« Reply #1 on: March 10, 2005, 12:48:29 PM »

John: I'm trying out this combo here today,
and will let you know what I find a little
later. Are you using the most recent version
of the Firefly software? I'm installed one
from January of this year.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Snapstream Firefly and X10 Active Home Pro
« Reply #2 on: March 10, 2005, 04:23:47 PM »

John: I've confirmed the problem. It's
something we're going to have to pursue with
Snapstream.
Logged

burntcrispy

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 19
Re: Snapstream Firefly and X10 Active Home Pro
« Reply #3 on: March 10, 2005, 05:03:02 PM »

I seam to be having problems with my ATI
remote wonder, that crashes whenever the
CM15A recieves a radio signal, it doesn't
matter wheter the Remote Wonders antena is
pluged in or not.  It seamed to be working
ok until I installed service pack 2 on
windows xp pro, and then update ATI Multi-
media center to 9.03(I think).
I tried reinstalling the Remote Wonder
Software (newest a mounth ago or so, I do
not know about know.) Then Active Home
crashed whenever I started it. (not sure if
that fixed Remote wonders crashing or not)
I tried reienstalling Active home, but no
luck I finally had to do a system restore
to get Active Home working again, and I
just finnaly gave up on Remote Wonder and
disabled it software from loading at start
up.
Any body else with problems?
Thanks
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Snapstream Firefly and X10 Active Home Pro
« Reply #4 on: March 10, 2005, 05:31:38 PM »

Try installing AHP after you're done
updating/installing the ATI software, and it
should work. We made a change to ActiveHome
Pro a while ago to fix an incompatibility,
but it still requires AHP to be (re-)
installed after the ATI stuff.
Logged

john

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Snapstream Firefly and X10 Active Home Pro
« Reply #5 on: March 11, 2005, 02:14:11 PM »

A fix would be most welcome.  For now, I've managed to
get it all working by connecting the CM15A to the PC in
my office, then using a Firecracker on the conference
room PC to send an RF signal to a TM751, who's signal is
then picked up by the CM15A.  Phew!

Thankfully, the Firecracker works with the drivers that the
Firefly software installs.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.