Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: RF Transmit A1  (Read 3422 times)

james couper

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
RF Transmit A1
« on: April 20, 2005, 09:32:52 AM »
I'm still not getting a RF Transmit on Unit
A1 a Chime on A1 responds but the TM571 does
not turn on. B1 Works c1 Works. These show
that the Rf was Transmitted This problem was
also with the last update.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: RF Transmit A1
« Reply #1 on: April 20, 2005, 12:17:56 PM »
How are you transmitting the RF command?
Using a macro, or by flipping the switch on
the TM751 on screen?
Logged

martin

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
Re: RF Transmit A1
« Reply #2 on: April 20, 2005, 02:28:53 PM »
It doesn't work for me if the TM751 is set
to the same House Code as your Monitored
House Code. If set to a different house
code, it works both from the UI and as part
of a macro. I'm using two TM751 as appliance
modules in my AHP configuration.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: RF Transmit A1
« Reply #3 on: April 20, 2005, 04:23:54 PM »
The TM751 only responds to RF signals. Any
Power Line signals turning ON A1 will not
activate the TM751s appliance type relay. It
has no power line X10 receiver in it only an
RF from remote one.
Logged

martin

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
Re: RF Transmit A1
« Reply #4 on: April 20, 2005, 05:40:16 PM »
Brian,

Correct but the CM15A can issue the required
RF command (i.e. A1).
CM15A can send (like a PalmPad) and receive
RF commands.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.