Please login or register.

Login with username, password and session length

Author Topic: RF100  (Read 4276 times)

emilio harris

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
RF100
« on: November 02, 2005, 08:15:20 AM »

When connected to the load the RF100 is not
working properly.  It change from on to off
but the light do not change the condition.
I measured the voltage at the output and
shows in some cases 28 Volts.  I have two
of them and both have the same problem.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: RF100
« Reply #1 on: November 02, 2005, 12:04:13 PM »

RF100?
Logged
"This aftershave makes me look fat"

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: RF100
« Reply #2 on: November 02, 2005, 12:55:51 PM »

By RF100 are you meaning the ACT Single Pole
- 20A, 120 VAC Feed Thru Relay?  If so, do
you have the black wire connected to the Hot
wire from the panel, the white wire connected
to the common neutral wire and the blue wire
connected to the load?  This module is no
longer in production, but he instructions for
this module can be found on ACT's website:

http://www.act-solutions.com/pdfs/PCCInst/rf100.pdf
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.