Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Be Aware...Problem with 2.4GHz  (Read 9375 times)

roger

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Be Aware...Problem with 2.4GHz
« on: January 13, 2006, 08:47:09 PM »
The 2.4GHz that the cameras work on actually
knocks out the 2.4GHz wireless internet. My
laptop is 2 feet away from the router and
the camera is 30 feet away. It kinda sucks.
Logged

rick

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 17
Re: Be Aware...Problem with 2.4GHz
« Reply #1 on: January 13, 2006, 09:59:40 PM »
Hi Roger !

One thing you can do his to switch the chanel
on the camera and receiver.

You should see a switch that says (Chanel
1-2-3-4 or a-b-c-d)on boththe camera and
receiver. You have to match both the camera
and reciver to the same chanel.

Try that and let me know !

See ya !

Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Be Aware...Problem with 2.4GHz
« Reply #2 on: January 14, 2006, 06:33:26 AM »
You may also find the wireless network
adapters can be set to different channels
also.
This is a fairly common problem as many
devices share the same 2.4Ghz band. 2.4Ghz
cordless phones can also be a problem.
Logged

netguy

  • Jr. Member
  • **
  • Helpful Post Rating: 8
  • Posts: 11
Re: Be Aware...Problem with 2.4GHz
« Reply #3 on: August 25, 2006, 07:11:04 PM »
Most likely you have interference problems.
I just posted the following message under "Interference of X-10 Equipment" thread: Interference of X-10 Equipment
« Last Edit: August 27, 2006, 12:20:01 AM by TakeTheActive »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.