Flashing light on Door Sensors/console beeps 5 times

[brandon]

Hi I have the Powerhouse Security system
model DS7000 and I have a problem with some
of the door sensors. This has happened with
2 seperate sensors now. The console will
flash showing a particular zone and
periodically the console beeps five times.
The alarm sets fine and alerts me when the
doors are opened but I still can't
understand what the error is from. I have
replaced the batteries but to no avail. Your
help is appreciated. Thanks!  

[kishore]

Change the unit code and house code and
reprogramme all sensors. (you may have a
neighbour using x10 products)

Do you have any other wireless items in use
like router / cordless phone. Is any placed
in proximity to the console unit if so move
away from the console.

[paul]

I have the same problem but it's only with
the newer DS10A sensors the older DW534
sensors work fine.

I bought my DS7000 about a month ago, and
am having the same problem, it started last
night with only one door sensor.  The
console flashed slowly (showing a low
battery error), and the console would
periodically beep 5 times, say every 15
minutes or so.  The alarm had been armed at
this time, and i had no false alarms.  Now,
when i went to change the batteries on the
door sensor, the LED only blinked once for
about 1/2 a second.  All of my other
sensors blink repeatedly for about 3
seconds.  Now, when i place brand new
batteries, my LED does not blink at all.
I'm thinking the door sensor is broken.
Any suggestions?

[dick]

Sometimes the sensors have to be reset by
holding down the test button for several
seconds until the light flashes.  It is in
the instructions, but is rather obscure.

[mark]

Is it possible that you have magnetic door
weather strips which are occassionally
messing up your magnetic switches??  

resetting the sensor fixed my problem.  thx
for the reply.

[sandi]

How do i reset the alarm. My b/f has moved
out and i need a new code on the
X10Powerhouse. TIA