Please login or register.

Login with username, password and session length

Author Topic: Programming a pause in phone number  (Read 3094 times)

sid

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Programming a pause in phone number
« on: February 28, 2005, 10:12:45 PM »

Does anyone know how to add a pause when
programming a series of numbers into the
auto dialer?
Logged

henry

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Programming a pause in phone number
« Reply #1 on: September 18, 2005, 06:32:08 PM »

I have the same question.  An automated phone system
has just been put into use, at my place of work.  The lag
time from the ringing to the pick-up is approx. 3 secs,
where just punching in my extension acess my office.
I'd like to be able to program my office number as well as
my cell  
Logged

ian

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 40
Re: Programming a pause in phone number
« Reply #2 on: September 18, 2005, 09:23:25 PM »

Unfortunately the thing isnt that smart and
if my memory serves me correctly I was told
that this could not be done...
Logged

rick

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 17
Re: Programming a pause in phone number
« Reply #3 on: September 19, 2005, 01:00:44 PM »

When you use a regular dailup modem you can
add a coma ( , ) for a pause of one second.
but its a command that the modem was
programmed for. Unfortunately the auto dialer
does not have does commands programmed into
it. So no luck unless you are a electronic
wiz and you can program the microchip to
accept a code for a pause.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.