Please login or register.

Login with username, password and session length

Author Topic: Sensor Problem.........  (Read 3114 times)

steven

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Sensor Problem.........
« on: November 26, 2005, 10:24:18 PM »

I have an older X10 RS system.I installed a
new sensor about 3 weeks ago.The console
accepted it.
The other day I go to arm the system before
I leave and a solid light no flashing shows
up for this sensor.I press lights off,no
effect.I press bypass,the light goe's off.I
bypassed it but,now the light is off.I tryed
openning the window....no alarm.

I tryed reinstalling it.Batteries out 3to4
seconds on test for new code.Batteries back
in.Console on install.The Console still
shows the sensor light in old slot,the
sensor has new batteries.But still no alarm.

Is it a bad sensor? The new sensor on an old
unit? Rest of system works fine.Just not the
new sensor.....Thanks,Steven
Logged

steven

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: Sensor Problem.........
« Reply #1 on: November 26, 2005, 10:53:44 PM »

The Console is a Radio Shack 49-2551A

The new sensor is 49-1001
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Sensor Problem.........
« Reply #2 on: November 27, 2005, 07:29:03 AM »

Maybe a bad sensor. I believe others here
have interchanged RS and X10 modules between
consoles both new and old.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.