Please login or register.

Login with username, password and session length

Author Topic: Modifying MS14a  (Read 5582 times)

ramlin

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Modifying MS14a
« on: November 25, 2005, 11:13:09 AM »

Can a motion sensor such as a MS14a be
modifited with a magnetic contact closure to
operate as a DS10a.  I would like the door
sensor to transmit an x10 address directly,
rather than interface with a security system
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Modifying MS14a
« Reply #1 on: November 25, 2005, 06:17:28 PM »

http://www.idobartana.com/hakb/index.htm
Has a modification to add a magnetic reed switch to an MS14a and many other things.
« Last Edit: October 16, 2009, 02:50:24 AM by -Bill- (of wgjohns.com) »
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Modifying MS14a
« Reply #2 on: November 26, 2005, 10:51:15 AM »

More information. From the diagrams and
schematic. It looks like the jumper being
cut and used. Is in the Dusk/Dawn Circuit.
My guess is it will still send motion
detection signals on the main address and
the magnetic switch on the A+1 address.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.