Contact
|
X10.com
November 23, 2024, 09:55:46 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Check the WM100 server status here
Click here for WM100 setup help
Home
Help
Search
Login
Register
X10 Community Forum
>
🛡Home Security
>
Home Security General
>
Powerhorn Model PH508
« previous
next »
Pages: [
1
]
Print
Author
Topic: Powerhorn Model PH508 (Read 3174 times)
nick
Newbie
Helpful Post Rating: 0
Posts: 1
Powerhorn Model PH508
«
on:
August 11, 2005, 10:47:07 AM »
Can the PH 508 Powerhorn be used as an alert
siren, independent of any X10 Security
Systems. Say, using a TM751 Transceiver and
a Security Remote. What components would be
needed and what if any setup procedures?
Thanks,
Nick
Logged
Brian H
Community Organizer
Hero Member
Helpful Post Rating: 305
Posts: 13295
Re: Powerhorn Model PH508
«
Reply #1 on:
August 12, 2005, 06:51:11 AM »
No. The security remotes use a different
code format that standard modules and
tranceivers ignore. Largest problem will be
the PH508. It does not respond to a single
ON command. It needs a series of signals
sent to it at around 1 second intervals. The
series is either an ON-OFF cycle using the
House and Unit code it is set to, or a
series of All Lights ON; All Units OFF on
the House Code it is set to. All Lights Off
also works with the All Lights ON in the
cycle.
Logged
john
Newbie
Helpful Post Rating: 0
Posts: 1
Re: Powerhorn Model PH508
«
Reply #2 on:
January 26, 2006, 01:30:50 PM »
Can the PH508 siren be used with the old
Radio Shack Plug and Play. It calls for
a remonte siren CMC 61-2613. They look
identical.
Thanks,
John
Logged
Print
Pages: [
1
]
« previous
next »
X10 Community Forum
>
🛡Home Security
>
Home Security General
>
Powerhorn Model PH508