Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Brian H]

OH. If you only have a TM751 Transceiver
and Super Remote. The tranceiver takes the
RF Remote commands and sends them to the
other modules. Like the Lamp Modules. The
TM751 also has an appliance module in it
hard wired to unit 1 and the house code you
set on the dial. The except tranceivers and
controllers [like the cm15a] modules can not
receive remote RF signals they only do line
based signals.

[michael park]

So the TM does have the Unit Code.  It'd be
nicer if I'd change it, though.

Thanks for all your help.

Mike

[Brian H]

Yes hard set to Unit #1. The RR501
Tranceiver from the Active Home Kit. Has a
switch for Unit #1 or #9 and could be
controled by a line signal. So if you ever
get a controller or any other device that
sends X10 signals on the powerline. The
TM751 will not respond. Like if you use a
MaxiController to send an A1 [if A is your
house code]. The TM751 will not respond.
Glad you are now working and you are welcoms.