Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: 1 [2]

Author Topic: moisture in modules  (Read 64704 times)

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: moisture in modules
« Reply #15 on: February 09, 2005, 06:14:44 PM »
Steve L. Yes I programed the outside light
module with an X10 remote and tranceiver.
I think the inside light module may dim, not
tried yet, though none of the B and D
remotes have a dim button.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: moisture in modules
« Reply #16 on: February 13, 2005, 12:03:06 PM »
Update. The outdoor module like the Socket
Rocket can be programed with three or more
ON signals of the wanted House Code and Unit
Code and it doesn't have to be continous.
With in 30 seconds of power application. I
used a Mini-Controller and did a few myself.
The Freewire remote and Messenger Hub is not
needed to do the programming.
Logged

steve l.

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: moisture in modules
« Reply #17 on: February 13, 2005, 02:24:37 PM »
Brian H

Thanks for the research! I'll definitely
pick one of these up from Tyler Tools for
use outside, I've gone through more than a
few modules in the last couple years, these
should hold up better, especially with some
waterduck splice tape around the
connections.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: moisture in modules
« Reply #18 on: February 13, 2005, 03:09:25 PM »
Glad it was a help.
Logged

joe s.

  • Hero Member
  • *****
  • Helpful Post Rating: 4
  • Posts: 194
Re: moisture in modules
« Reply #19 on: February 13, 2005, 07:26:29 PM »
It may seem real early (or late)...but I'm
thinking...X'mas.
Logged
Pages: 1 [2]
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.