Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JERRY VARN]

can anyone tell me why when i set a dimable light switch to 40 % and run it from the pc i can make it turn on and then brighten to 40%, but , when i down load it and run the smart macro from a hand held remote it always turns the light on at 100 % and then dims it to 40 %. when i run the macro at night it blinds me then sets to 40 %.  ?

[jkarney]

JERRY VARN,

Can you provide more information.  What kind of lamp module? X10 brand or Smarthome brand? Model #?

If you are using a LM465 lamp module; from the off state this module will go to full bright then go to the dim level desired. I have linked a thread that discusses what I think you are looking to do. 

Creating a Macro to set a Lamp Module to a specific Brightness  (Read 6590 times)

As for another option;  I was using the X10 LM465 lamp module and did not care to program the marco to soft start my light. I just ended up purchasing a Smarthome LampLinc PLC #2000SHL which supports soft start to replace my LM465. Unfortunately Smarthome has discontinued this product. Smarthome is now pushing the INSTEON LampLinc V2 Lamp Dimmer #2456D3. I have not tested this module but after some reading it appears to support the soft start.

I hope this helps. 


[TTA Edit: Added description to LINK.]