Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Macro Delays fail when Long delay is used  (Read 5685 times)

MitchB

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Macro Delays fail when Long delay is used
« on: April 03, 2006, 10:19:31 PM »
The macro purpose is to charge up my laptop for 4 hours or so.

Here's the syntax:

C1 ON
Delay 04:00:00
C1 OFF

I've tested this with values of 5 minutes, 1 hr, 2 hrs, 4:30 hrs, and 04:00:30.  Everytihng over 2 hours fails, in that C1 never turns back off, and AHP doesn't log a C1 OFF either.  So, it appears that the command is never sent.  (No, I didn't try 03:00:00.)

Any ideas?
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Macro Delays fail when Long delay is used
« Reply #1 on: April 04, 2006, 12:20:43 PM »
Is this stored in the interface, or on the PC?
Logged

MitchB

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Macro Delays fail when Long delay is used
« Reply #2 on: April 04, 2006, 09:37:27 PM »
Ah, sorrry, stored in the interface.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Macro Delays fail when Long delay is used
« Reply #3 on: April 05, 2006, 01:40:53 PM »
We'll test it out.
Logged

Mystyx

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 201
  • eye see you
Re: Macro Delays fail when Long delay is used
« Reply #4 on: April 05, 2006, 10:18:04 PM »
In the meantime...  you could try adding a dummy module and delay 1 hour inbetween each?
Logged
Anything is Possible, NOW!! But What can I afford?!
I Can't Afford Time, cause Money is so Important!!

MitchB

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Macro Delays fail when Long delay is used
« Reply #5 on: April 06, 2006, 07:46:11 PM »
I think I'll try that tonight, will let you know.

Actually, I put two 2:00:00 delays back to back - we'll see.
« Last Edit: April 06, 2006, 08:00:17 PM by MitchB »
Logged

MitchB

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Macro Delays fail when Long delay is used
« Reply #6 on: April 07, 2006, 10:48:43 PM »
Putting two 2 hr. delays back to back does not work, despite the fact that AHP shows a timeline of 4 hrs.

Inserting a module control (Garage light OFF) between the two delays seems to work fine.

I'd be happier with a correct fix, however.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.