Two Way Modules

[BudWah]

Hey Now * * * I have two older 'Two Way Lamp Modules' ... # LM465 ...

Also Camera XC22A...

Will these work with my AHP programming ...

I also have 'Socket Rockets' that just don't work at all...

If so, what are their ahp listing #'s, so that I can program them in...

Thanks for the quick reply... Budwah

[Brian H]

LM465 is not a two way module. X10Pro PAM21 and PAM22 are two way. Are they in the AHP Choices?

Socket Rocket. LM15a. I have seen indications that programming them maybe added to AHP [if not there yet]. For now most folks write a macro that sends the needed three X10 On codes in the first 30 seconds of applied power. To program them. Many use a Tabletop Controller for now.

[BudWah]

hey Now* * *  One more time with this...

LM465 'IS' a 'Lamp Module' ...

Will it work with AHP or is it too old???

Will the 'Socket Rocket' Work with AHP

Budwah

[Brian H]

You said a "Two Way Module" and the LM465 is NOT two way.
Yes it is a lamp module and should be in AHPs list of modules. The Socket Rocket I believe is in the list also; just I have not seen any easy way to program it. If your modules are not working with AHP try them in a different outlet. If they then work you have a signal strength problem or a phase coupling problem. If by chance it is from an RF remote. Double check in AHP that the tranceived house code for the modules is set to be tranceived.

[dave w]

Budwah

Hey now ***  Try this

http://www.x10.com/support/support_manuals.htm